22mm G80 Alloy Steel Chain Hoist Lifting Chain Link Chain
22mm G80 Alloy Steel Chain Hoist Lifting Chain Link Chain
Kategori
Aplikasyon
Pwodwi ki gen rapò
Paramèt chèn
Ki baze sou SCIC G80 & G100 teknoloji pwodiksyon chèn leve, nou byen pwolonje liy pwodwi nou an nan amann tolerans anvwaye chèn Klas T (Types T, DAT & DT), pou itilize nan seri chèn anvwaye manyèl ak pouvwa kondwi.
Figi 1: chèn anvwaye / lyen
Kle
| 1 | Travèse liy santral lyen an | l | se longè anplasman miltip |
| p | se anplasman an | dm | se dyamèt materyèl la jan yo mezire |
| ds | se dyamèt soude a | e | se longè dimansyonman afekte pa soude |
| w3 | se lajè entèn nan soude a | w2 | se lajè ekstèn sou soude a |
Tablo 1: chèn anvwaye / dimansyon lyen (mm)
| Nominal size dn | Material diametertolerance | Pitch | Width | Gaugelengthof 11xpn | Weld diameter ds max. | |||
| pn | tolerance1) | internal w3 min. | external w2 max. | l | tolerance1) | |||
| 4 | ±0.2 | 12 | 0.25 | 4.8 | 13.6 | 132 | 0.6 | 4.3 |
| 5 | ±0.2 | 15 | 0.3 | 6.0 | 17.0 | 165 | 0.8 | 5.4 |
| 6 | ±0.2 | 18 | 0.35 | 7.2 | 20.4 | 198 | 1.0 | 6.5 |
| 7 | ±0.3 | 21 | 0.4 | 8.4 | 23.8 | 231 | 1.1 | 7.6 |
| 8 | ±0.3 | 24 | 0.5 | 9.6 | 27.2 | 264 | 1.3 | 8.6 |
| 9 | ±0.4 | 27 | 0.5 | 10.8 | 30.6 | 297 | 1.4 | 9.7 |
| 10 | ±0.4 | 30 | 0.6 | 12.0 | 34.0 | 330 | 1.6 | 10.8 |
| 11 | ±0.4 | 33 | 0.6 | 13.2 | 37.4 | 363 | 1.7 | 11.9 |
| 12 | ±0.5 | 36 | 0.7 | 14.4 | 40.8 | 396 | 1.9 | 13.0 |
| 13 | ±0.5 | 39 | 0.8 | 15.6 | 44.2 | 429 | 2.1 | 14.0 |
| 14 | ±0.6 | 42 | 0.8 | 16.8 | 47.6 | 462 | 2.2 | 15.1 |
| 16 | ±0.6 | 48 | 0.9 | 19.2 | 54.4 | 528 | 2.5 | 17.3 |
| 18 | ±0.9 | 54 | 1.0 | 21.6 | 61.2 | 594 | 2.9 | 19.4 |
| 20 | ±1.0 | 60 | 1.2 | 24.0 | 68.0 | 660 | 3.2 | 21.6 |
| 22 | ±1.1 | 66 | 1.3 | 26.4 | 74.8 | 726 | 3.5 | 23.8 |
| 1)Thesetolerancesareusuallydividedinto+2/3and–1/3forbothtliindividyallinkandthe standardgaugelength. | ||||||||
Tablo 2: limit chaj travay chenn anvwaye (WLL)
| Nominal size dn mm | Chain type T t | Chain type DAT t | Chain type DT t |
| 4 5 6 | 0.5 0.8 1.1 | 0.4 0.63 0.9 | 0.25 0.4 0.56 |
| 7 8 9 | 1.5 2 2.5 | 1.2 1.6 2 | 0.75 1 1.25 |
| 10 11 12 | 3.2 3.8 4.5 | 2.5 3 3.6 | 1.6 1.9 2.2 |
| 13 14 16 | 5.3 6 8 | 4.2 5 6.3 | 2.6 3 4 |
| 18 20 22 | 10 12.5 15 | 8 10 12.5 | 5 6.3 7.5 |
| mean stress N/mm2 | 200 | 160 | 100 |
Tablo 3: anvwaye chèn manifakti fòs prèv ak fòs kraze
| Nominal size dn mm | Manufacturing proof force (MPF) kN mnan. | Breaking force (BF) kN mnan. |
| 4 | 12.6 | 20.1 |
| 5 | 19.6 | 31.4 |
| 6 | 28.3 | 45.2 |
| 7 | 38.5 | 61.6 |
| 8 | 50.3 | 80.4 |
| 9 | 63.6 | 102 |
| 10 | 78.5 | 126 |
| 11 | 95 | 152 |
| 12 | 113 | 181 |
| 13 | 133 | 212 |
| 14 | 154 | 246 |
| 16 | 201 | 322 |
| 18 | 254 | 407 |
| 20 | 314 | 503 |
| 22 | 380 | 608 |
Tablo 4: total elongasyon ultim ak sifas dite
|
| hoist chain types | ||
| T | DAT | DT | |
| Total ultimate elongasyonn A%min | 10 | 10 | 5 |
| Surface hardness min dn < 7 mm, HV 5 dn = 7 mm to 11 mm, HV 10 dn > 11 mm, HV 10 |
360 360 360 |
500 500 450 |
550 550 500 |
Enspeksyon sit
Sèvis nou an
