Transporteur ak chenn asansè
Kategori
Leve chèn, chèn lyen kout,chèn lyen long, chèn lyen wonn,leve chèn, leve chenn,Chèn klas 50, chèn klas 70,DIN 764-1, DIN 764-2, DIN 766,Round chenn lyen asye pou CONVEYOR chènchèn transporteur, chèn asansè bokit,chèn asye alyaj
Aplikasyon
Asansè bokit, CONVEYOR, Ratwa Chenn pou asansè bokit, CONVEYOR ak grate SCIC pwodui chenn lyen asye wonn pou chak DIN 764 (G30 & G50, vèsyon 2010) ak DIN 766 (vèsyon 2015) estanda, pou aplikasyon nan asansè bokit, CONVEYOR ak grate. Chenn ki espesifye isit la pa dwe itilize kòm akseswa leve, fistibal oswa nenpòt lòt levage anlè.
Figi 1: DIN 764 ak DIN 766 dimansyon chenn lyen asye wonn
Tablo 1: DIN 764 wonn chenn lyen asye (G30 & G50) dimansyon (mm)
| nominal | dyamèt | anplasman | lajè | longè kalib (11-lyen) | kg/m | |||||
| dxt | d | tolerans | t | tolerans | enteryè | ekstèn | l | tolerans | ||
| klas A | klas B | |||||||||
| 10 x 35 | 10 | ± 0.4 | 35 | +0.6/-0.2 | 14.0 | 36 | 385 | +2/-1 | +3/-1 | 2.1 |
| 13 x 45 | 13 | ± 0.5 | 45 | +0.8/-0.3 | 18.0 | 47 | 495 | +3/-1 | +4/-1 | 3.5 |
| 16 x 56 | 16 | ± 0.6 | 56 | +1.0/-0.3 | 22.0 | 58 | 616 | +3/-1 | +5/-2 | 5.3 |
| 18 x 63 | 18 | ± 0.9 | 63 | +1.1/-0.4 | 24.0 | 65 | 693 | +4/-1 | +6/-2 | 6.7 |
| 20 x 70 | 20 | ± 1.0 | 70 | +1.3/-0.4 | 27.0 | 72 | 770 | +4/-1 | +6/-2 | 8.3 |
| 23 x 80 | 23 | ± 1.2 | 80 | +1.4/-0.5 | 31.0 | 83 | 880 | +5/-2 | +7/-2 | 11.0 |
| 26 x 91 | 26 | ± 1.3 | 91 | +1.6/-0.5 | 35.0 | 94 | 1001 | +5/-2 | +8/-3 | 14.0 |
| 30 x 105 | 30 | ± 1.5 | 105 | +1.9/-0.6 | 39.0 | 108 | 1155 | +6/-2 | +9/-3 | 18.5 |
| 33 x 115 | 33 | ± 1.7 | 115 | +2.1/-0.7 | 43.0 | 119 | 1265 | +7/-2 | +10/-3 | 22.5 |
| 36 x 126 | 36 | ± 1.8 | 126 | +2.3/-0.8 | 47.0 | 130 | 1386 | +7/-2 | +11/-4 | 27.0 |
| 39 x 136 | 39 | ± 2.0 | 136 | +2.4/-0.8 | 51.0 | 140 | 1496 | +8/-3 | +12/-4 | 31.5 |
| 42 x 147 | 42 | ± 2.1 | 147 | +2.6/-0.9 | 55.0 | 151 | 1617 | +9/-3 | +13/-4 | 36.5 |
Tablo 2: DIN 766 dimansyon chenn lyen asye wonn (mm)
| nominal | dyamèt | anplasman | lajè | longè kalib (11-lyen) | kg/m | |||||
| dxt | d | tolerans | t | tolerans | enteryè | ekstèn | l | tolerans | ||
| klas A | klas B | |||||||||
| 10 x 28 | 10 | ± 0.4 | 28 | +0.5/-0.3 | 14.0 | 36 | 308 | +2 /-1 | +2 /-1 | 2.3 |
| 13 x 36 | 13 | ± 0.5 | 36 | +0.6/-0.3 | 18.0 | 47 | 396 | +2 /-1 | +3 /-2 | 3.9 |
| 16 x 45 | 16 | ± 0.6 | 45 | +0.8/-0.4 | 22.5 | 58 | 496 | +3 /-1 | +4 /-2 | 5.9 |
| 18 x 50 | 18 | ± 0.9 | 50 | +0.9/-0.5 | 25.0 | 65 | 550 | +3 /-1 | +4 /-2 | 7.5 |
| 20 x 56 | 20 | ± 1.0 | 56 | +1.0/-0.5 | 28.0 | 72 | 616 | +3 /-2 | +5 /-2 | 9.2 |
| 23 x 64 | 23 | ± 1.2 | 64 | +1.2/-0.6 | 32.0 | 83 | 704 | +4 /-2 | +6 /-3 | 12.0 |
| 26 x 73 | 26 | ± 1.3 | 73 | +1.3/-0.7 | 34.0 | 94 | 803 | +4 /-2 | +6 /-3 | 15.5 |
| 30 x 84 | 30 | ± 1.5 | 84 | +1.5/-0.8 | 39.0 | 108 | 924 | +5 /-2 | +7 /-4 | 20.5 |
| 33 x 92 | 33 | ± 1.7 | 92 | +1.7/-0.8 | 43.0 | 119 | 1012 | +5 /-3 | +8 /-4 | 25.0 |
| 36 x 101 | 36 | ± 1.8 | 101 | +1.8/-0.9 | 47.0 | 130 | 1111 | +6 /-3 | +9 /-4 | 29.5 |
| 39 x 109 | 39 | ± 2.0 | 109 | +2.0/-1.0 | 50.5 | 140 | 1199 | +6 /-3 | +10 /-5 | 35.0 |
| 42 x 118 | 42 | ± 2.1 | 118 | +2.1/-1.1 | 54.5 | 151 | 1298 | +7 /-4 | +10 /-5 | 40.5 |
Tablo 3: DIN 764 wonn chenn lyen asye (G30 & G50) fòs travay ak pwopriyete mekanik
| gwosè nominal | fòs travay | manifakti | fòs kraze | pliye devyasyon | total elongasyon final la | |||||
| G30 | G50 | G30 | G50 | G30 | G50 | G30 | G50 | G30 | G50 | |
| 10 x 35 | 12.5 | 20 | 36 | 56 | 50 | 80 | 10 | 10 | 20 | 15 |
| 13 x 45 | 20 | 32 | 56 | 90 | 80 | 125 | 13 | 13 | ||
| 16 x 56 | 32 | 50 | 90 | 140 | 125 | 200 | 16 | 16 | ||
| 18 x 63 | 40 | 63 | 110 | 180 | 160 | 250 | 18 | 18 | ||
| 20 x 70 | 50 | 80 | 140 | 220 | 200 | 320 | 20 | 20 | ||
| 23 x 80 | 63 | 100 | 180 | 280 | 250 | 400 | 23 | 23 | ||
| 26 x 91 | 80 | 125 | 220 | 360 | 320 | 500 | 26 | 26 | ||
| 30 x 105 | 110 | 180 | 320 | 500 | 450 | 710 | 30 | 30 | ||
| 33 x 115 | 125 | 200 | 360 | 560 | 500 | 800 | 33 | 33 | ||
| 36 x 126 | 160 | 250 | 450 | 710 | 630 | 1000 | 36 | 36 | ||
| 39 x 136 | 180 | 280 | 500 | 800 | 710 | 1100 | 39 | 39 | ||
| 42 x 147 | 220 | 360 | 630 | 1000 | 900 | 1400 | 42 | 42 | ||
Tablo 4: DIN 766 wonn asye lyen chenn fòs travay ak pwopriyete mekanik
| gwosè nominal
| fòs travay | manifakti | fòs kraze | pliye devyasyon | total elongasyon final la | |
| vètikal | orizontal | |||||
| 10 x 28 | 10 | 12.5 | 36 | 50 | 8 | 20 |
| 13 x 36 | 16 | 20 | 56 | 80 | 10 | |
| 16 x 45 | 25 | 32 | 90 | 125 | 13 | |
| 18 x 50 | 32 | 40 | 110 | 160 | 14 | |
| 20 x 56 | 40 | 50 | 140 | 200 | 16 | |
| 23 x 64 | 50 | 63 | 180 | 250 | 18 | |
| 26 x 73 | 63 | 80 | 220 | 320 | 21 | |
| 30 x 84 | 90 | 110 | 320 | 450 | 24 | |
| 33 x 92 | 110 | 130 | 380 | 530 | 26 | |
| 36 x 101 | 125 | 160 | 450 | 630 | 29 | |
| 39 x 109 | 150 | 190 | 530 | 750 | 31 | |
| 42 x 118 | 180 | 220 | 630 | 900 | 34 | |
