Alman Creole Link chèn galvanize Steel Link chèn zenk plake chèn
Alman Creole Link chèn galvanize Steel Link chèn zenk plake chèn
Kategori
Lifting Chain, G100 Chain, G120 Chain, G10 Chain, G12 Chain, G100 Lifting Chain, G100 alyaj chèn, Lifting Chain Pou Vann, 1 Ton Lift, Lifting ak lashing chèn, kout lyen chèn, wonn lyen chèn leve, chèn alyaj asye, chèn pou leve, leve chèn shorteners, 10mm chenn leve, chenn leve sètifye, chenn leve asye, en818-2 chèn leve, chenn leve endistriyèl, chenn leve veso, chenn leve ak fistibal, chenn leve pou vann, manifaktirè chèn leve, leve chèn klas, gwosè chèn leve, lyen leve, chenn leve devwa lou, chèn leve devwa lou
Aplikasyon
Pwodwi ki gen rapò
Paramèt chèn
SCIC Klas 100 (G100) chenn pou leve yo fèt dapre estanda ASTM A973 / A973M-21, ak nikèl chromium molybdenum manganèz alyaj asye pou chak estanda DIN 17115; byen fèt / kontwole soude ak chalè-tretman asire chenn pwopriyete mekanik ki gen ladan fòs tès, fòs kraze, elongasyon & dite.
Figi 1: Dimansyon chèn klas 100
Tablo 1: Dimansyon chèn klas 100 (G100).
| dyamèt | anplasman | lajè | pwa inite | |||
| nominal | tolerans | p (mm) | tolerans | enteryè W1 | ekstèn W2 | |
| 6 | ± 0.24 | 18 | ± 0.5 | 7.8 | 22.2 | 0.8 |
| 7 | ± 0.28 | 21 | ± 0.6 | 9.1 | 25.9 | 1.1 |
| 8 | ± 0.32 | 24 | ± 0.7 | 10.4 | 29.6 | 1.4 |
| 10 | ± 0.4 | 30 | ± 0.9 | 13 | 37 | 2.2 |
| 13 | ± 0.52 | 39 | ± 1.2 | 16.9 | 48.1 | 4.1 |
| 16 | ± 0.64 | 48 | ± 1.4 | 20.8 | 59.2 | 6.2 |
| 18 | ± 0.9 | 54 | ± 1.6 | 23.4 | 66.6 | 8 |
| 19 | ± 1 | 57 | ± 1.7 | 24.7 | 70.3 | 9 |
| 20 | ± 1 | 60 | ± 1.8 | 26 | 74 | 9.9 |
| 22 | ± 1.1 | 66 | ± 2.0 | 28.6 | 81.4 | 12 |
| 23 | ± 1.2 | 69 | ± 2.1 | 29.9 | 85.1 | 13.1 |
| 24 | ± 1.2 | 72 | ± 2.1 | 30 | 84 | 14.5 |
| 25 | ± 1.3 | 75 | ± 2.2 | 32.5 | 92.5 | 15.6 |
| 26 | ± 1.3 | 78 | ± 2.3 | 33.8 | 96.2 | 16.8 |
| 28 | ± 1.4 | 84 | ± 2.5 | 36.4 | 104 | 19.5 |
| 30 | ± 1.5 | 90 | ± 2.7 | 37.5 | 105 | 22.1 |
| 32 | ± 1.6 | 96 | ± 2.9 | 41.6 | 118 | 25.4 |
| 36 | ± 1.8 | 108 | ± 3.2 | 46.8 | 133 | 32.1 |
| 38 | ± 1.9 | 114 | ± 3.4 | 49.4 | 140.6 | 35.8 |
| 40 | ± 2 | 120 | ± 4.0 | 52 | 148 | 39.7 |
| 45 | ± 2.3 | 135 | ± 4.0 | 58.5 | 167 | 52.2 |
| 48 | ± 2.4 | 144 | ± 4.3 | 62.4 | 177.6 | 57.2 |
| 50 | ± 2.6 | 150 | ± 4.5 | 65 | 185 | 62 |
Tablo 2: Klas 100 (G100) pwopriyete mekanik chèn
| dyamèt | limit chaj k ap travay | fòs prèv fabrikasyon | min. fòs kraze |
| 6 | 1.4 | 36 | 57 |
| 7 | 1.9 | 48 | 77 |
| 8 | 2.5 | 63 | 101 |
| 10 | 4 | 98 | 157 |
| 13 | 6.7 | 166 | 265 |
| 16 | 10.3 | 251 | 402 |
| 18 | 12.5 | 318 | 509 |
| 19 | 14 | 354 | 567 |
| 20 | 16 | 393 | 628 |
| 22 | 19.4 | 475 | 760 |
| 23 | 20 | 519 | 831 |
| 24 | 23 | 566 | 905 |
| 25 | 25 | 614 | 982 |
| 26 | 26.5 | 664 | 1060 |
| 28 | 30.5 | 769 | 1230 |
| 30 | 35.5 | 884 | 1415 |
| 32 | 40.5 | 1006 | 1610 |
| 36 | 50 | 1272 | 2035 |
| 38 | 56.5 | 1420 | 2270 |
| 40 | 62.5 | 1571 | 2515 |
| 45 | 81 | 1988 | 3180 |
| 48 | 92 | 2263 | 3620 |
| 50 | 98 | 2453 | 3925 |
| nòt: total elongasyon ultim nan fòs kraze se min. 25%; | |||
| chanjman nan Limit chaj k ap travay an relasyon ak tanperati a | |
| Tanperati (°C) | WLL % |
| -40 a 200 | 100% |
| 200 a 300 | 90% |
| 300 a 400 | 75% |
| plis pase 400 | inakseptab |
Enspeksyon sit
Sèvis nou an
