Klas 80 (G80) leve chenn
Kategori
Leve ak lashing, chèn, kout lyen chèn, wonn lyen chèn leve, chèn Klas 80, chèn G80, fistibal chèn, chenn fistibal, DIN 818-2 chèn tolerans mwayen pou fistibal chèn Klas 8, chèn asye alyaj.
Aplikasyon
Leve ak lashing, chay leve, chay obligatwa
Chèn SCIC Klas 80 (G80) pou leve yo fèt dapre estanda EN 818-2, ak nikèl chromium molybdène manganèz alyaj asye pou chak estanda DIN 17115; byen fèt / kontwole soude ak chalè-tretman asire chenn pwopriyete mekanik ki gen ladan fòs tès, fòs kraze, elongasyon & dite.
Figi 1: Dimansyon lyen chèn klas 80
Tablo 1: Dimansyon chèn klas 80 (G80), EN 818-2
| dyamèt | anplasman | lajè | pwa inite | |||
| nominal | tolerans | p (mm) | tolerans | enteryè W1 | ekstèn W2 | |
| 6 | ± 0.24 | 18 | ± 0.5 | 7.8 | 22.2 | 0.8 |
| 7 | ± 0.28 | 21 | ± 0.6 | 9.1 | 25.9 | 1.1 |
| 8 | ± 0.32 | 24 | ± 0.7 | 10.4 | 29.6 | 1.4 |
| 10 | ± 0.4 | 30 | ± 0.9 | 13 | 37 | 2.2 |
| 13 | ± 0.52 | 39 | ± 1.2 | 16.9 | 48.1 | 4.1 |
| 16 | ± 0.64 | 48 | ± 1.4 | 20.8 | 59.2 | 6.2 |
| 18 | ± 0.9 | 54 | ± 1.6 | 23.4 | 66.6 | 8 |
| 19 | ± 1 | 57 | ± 1.7 | 24.7 | 70.3 | 9 |
| 20 | ± 1 | 60 | ± 1.8 | 26 | 74 | 9.9 |
| 22 | ± 1.1 | 66 | ± 2.0 | 28.6 | 81.4 | 12 |
| 23 | ± 1.2 | 69 | ± 2.1 | 29.9 | 85.1 | 13.1 |
| 24 | ± 1.2 | 72 | ± 2.1 | 30 | 84 | 14.5 |
| 25 | ± 1.3 | 75 | ± 2.2 | 32.5 | 92.5 | 15.6 |
| 26 | ± 1.3 | 78 | ± 2.3 | 33.8 | 96.2 | 16.8 |
| 28 | ± 1.4 | 84 | ± 2.5 | 36.4 | 104 | 19.5 |
| 30 | ± 1.5 | 90 | ± 2.7 | 37.5 | 105 | 22.1 |
| 32 | ± 1.6 | 96 | ± 2.9 | 41.6 | 118 | 25.4 |
| 36 | ± 1.8 | 108 | ± 3.2 | 46.8 | 133 | 32.1 |
| 38 | ± 1.9 | 114 | ± 3.4 | 49.4 | 140.6 | 35.8 |
| 40 | ± 2 | 120 | ± 4.0 | 52 | 148 | 39.7 |
| 45 | ± 2.3 | 135 | ± 4.0 | 58.5 | 167 | 52.2 |
| 48 | ± 2.4 | 144 | ± 4.3 | 62.4 | 177.6 | 57.2 |
| 50 | ± 2.6 | 150 | ± 4.5 | 65 | 185 | 62 |
Tablo 2: Klas 80 (G80) pwopriyete mekanik chèn, EN 818-2
| dyamèt | limit chaj k ap travay | fòs prèv fabrikasyon | min. fòs kraze |
| 6 | 1.12 | 28.3 | 45.2 |
| 7 | 1.5 | 38.5 | 61.6 |
| 8 | 2 | 50.3 | 80.4 |
| 10 | 3.15 | 78.5 | 126 |
| 13 | 5.3 | 133 | 212 |
| 16 | 8 | 201 | 322 |
| 18 | 10 | 254 | 407 |
| 19 | 11.2 | 284 | 454 |
| 20 | 12.5 | 314 | 503 |
| 22 | 15 | 380 | 608 |
| 23 | 16 | 415 | 665 |
| 24 | 18 | 452 | 723 |
| 25 | 20 | 491 | 785 |
| 26 | 21.2 | 531 | 850 |
| 28 | 25 | 616 | 985 |
| 30 | 28 | 706 | 1130 |
| 32 | 31.5 | 804 | 1290 |
| 36 | 40 | 1020 | 1630 |
| 38 | 45 | 1130 | 1810 |
| 40 | 50 | 1260 | 2010 |
| 45 | 63 | 1590 | 2540 |
| 48 | 72 | 1800 | 2890 |
| 50 | 78.5 | 1963 | 3140 |
| nòt: total elongasyon ultim nan fòs kraze se min. 20%; | |||
| chanjman nan Limit chaj k ap travay an relasyon ak tanperati a | |
| Tanperati (°C) | WLL % |
| -40 a 200 | 100% |
| 200 a 300 | 90% |
| 300 a 400 | 75% |
| plis pase 400 | inakseptab |
