Gwo devwa Endistriyèl 10mm galvanised nwa chaj leve lyen asye chaj chèn
Gwo devwa Endistriyèl 10mm galvanised nwa chaj leve lyen asye chaj chèn
Kategori
Aplikasyon
Pwodwi ki gen rapò
Paramèt chèn
Chèn SCIC Klas 80 (G80) pou leve yo fèt dapre estanda EN 818-2, ak nikèl chromium molybdène manganèz alyaj asye pou chak estanda DIN 17115; byen fèt / kontwole soude ak chalè-tretman asire chenn pwopriyete mekanik ki gen ladan fòs tès, fòs kraze, elongasyon & dite.
Figi 1: Dimansyon lyen chèn klas 80
Tablo 1: Dimansyon chèn klas 80 (G80), EN 818-2
| dyamèt | anplasman | lajè | pwa inite | |||
| nominal | tolerans | p (mm) | tolerans | enteryè W1 | ekstèn W2 | |
| 6 | ± 0.24 | 18 | ± 0.5 | 7.8 | 22.2 | 0.8 |
| 7 | ± 0.28 | 21 | ± 0.6 | 9.1 | 25.9 | 1.1 |
| 8 | ± 0.32 | 24 | ± 0.7 | 10.4 | 29.6 | 1.4 |
| 10 | ± 0.4 | 30 | ± 0.9 | 13 | 37 | 2.2 |
| 13 | ± 0.52 | 39 | ± 1.2 | 16.9 | 48.1 | 4.1 |
| 16 | ± 0.64 | 48 | ± 1.4 | 20.8 | 59.2 | 6.2 |
| 18 | ± 0.9 | 54 | ± 1.6 | 23.4 | 66.6 | 8 |
| 19 | ± 1 | 57 | ± 1.7 | 24.7 | 70.3 | 9 |
| 20 | ± 1 | 60 | ± 1.8 | 26 | 74 | 9.9 |
| 22 | ± 1.1 | 66 | ± 2.0 | 28.6 | 81.4 | 12 |
| 23 | ± 1.2 | 69 | ± 2.1 | 29.9 | 85.1 | 13.1 |
| 24 | ± 1.2 | 72 | ± 2.1 | 30 | 84 | 14.5 |
| 25 | ± 1.3 | 75 | ± 2.2 | 32.5 | 92.5 | 15.6 |
| 26 | ± 1.3 | 78 | ± 2.3 | 33.8 | 96.2 | 16.8 |
| 28 | ± 1.4 | 84 | ± 2.5 | 36.4 | 104 | 19.5 |
| 30 | ± 1.5 | 90 | ± 2.7 | 37.5 | 105 | 22.1 |
| 32 | ± 1.6 | 96 | ± 2.9 | 41.6 | 118 | 25.4 |
| 36 | ± 1.8 | 108 | ± 3.2 | 46.8 | 133 | 32.1 |
| 38 | ± 1.9 | 114 | ± 3.4 | 49.4 | 140.6 | 35.8 |
| 40 | ± 2 | 120 | ± 4.0 | 52 | 148 | 39.7 |
| 45 | ± 2.3 | 135 | ± 4.0 | 58.5 | 167 | 52.2 |
| 48 | ± 2.4 | 144 | ± 4.3 | 62.4 | 177.6 | 57.2 |
| 50 | ± 2.6 | 150 | ± 4.5 | 65 | 185 | 62 |
Tablo 2: Klas 80 (G80) pwopriyete mekanik chèn, EN 818-2
| dyamèt | limit chaj k ap travay | fòs prèv fabrikasyon | min. fòs kraze |
| 6 | 1.12 | 28.3 | 45.2 |
| 7 | 1.5 | 38.5 | 61.6 |
| 8 | 2 | 50.3 | 80.4 |
| 10 | 3.15 | 78.5 | 126 |
| 13 | 5.3 | 133 | 212 |
| 16 | 8 | 201 | 322 |
| 18 | 10 | 254 | 407 |
| 19 | 11.2 | 284 | 454 |
| 20 | 12.5 | 314 | 503 |
| 22 | 15 | 380 | 608 |
| 23 | 16 | 415 | 665 |
| 24 | 18 | 452 | 723 |
| 25 | 20 | 491 | 785 |
| 26 | 21.2 | 531 | 850 |
| 28 | 25 | 616 | 985 |
| 30 | 28 | 706 | 1130 |
| 32 | 31.5 | 804 | 1290 |
| 36 | 40 | 1020 | 1630 |
| 38 | 45 | 1130 | 1810 |
| 40 | 50 | 1260 | 2010 |
| 45 | 63 | 1590 | 2540 |
| 48 | 72 | 1800 | 2890 |
| 50 | 78.5 | 1963 | 3140 |
| nòt: total elongasyon ultim nan fòs kraze se min. 20%; | |||
| chanjman nan Limit chaj k ap travay an relasyon ak tanperati a | |
| Tanperati (°C) | WLL % |
| -40 a 200 | 100% |
| 200 a 300 | 90% |
| 300 a 400 | 75% |
| plis pase 400 | inakseptab |
Enspeksyon sit
Sèvis nou an
