Leve chenn - Dia 22mm EN 818-2, AS2321, ASTM A973-21, NACM klas 100 (G100) chèn
Kategori
Aplikasyon
Pwodwi ki gen rapò
Paramèt chèn
SCIC Klas 100 (G100) chenn pou leve yo fèt dapre estanda ASTM A973 / A973M-21, ak nikèl chromium molybdenum manganèz alyaj asye pou chak estanda DIN 17115; byen fèt / kontwole soude ak chalè-tretman asire chenn pwopriyete mekanik ki gen ladan fòs tès, fòs kraze, elongasyon & dite.
Figi 1: Dimansyon chèn klas 100
Tablo 1: Dimansyon chèn klas 100 (G100).
| dyamèt | anplasman | lajè | pwa inite | |||
| nominal | tolerans | p (mm) | tolerans | enteryè W1 | ekstèn W2 | |
| 6 | ± 0.24 | 18 | ± 0.5 | 7.8 | 22.2 | 0.8 |
| 7 | ± 0.28 | 21 | ± 0.6 | 9.1 | 25.9 | 1.1 |
| 8 | ± 0.32 | 24 | ± 0.7 | 10.4 | 29.6 | 1.4 |
| 10 | ± 0.4 | 30 | ± 0.9 | 13 | 37 | 2.2 |
| 13 | ± 0.52 | 39 | ± 1.2 | 16.9 | 48.1 | 4.1 |
| 16 | ± 0.64 | 48 | ± 1.4 | 20.8 | 59.2 | 6.2 |
| 18 | ± 0.9 | 54 | ± 1.6 | 23.4 | 66.6 | 8 |
| 19 | ± 1 | 57 | ± 1.7 | 24.7 | 70.3 | 9 |
| 20 | ± 1 | 60 | ± 1.8 | 26 | 74 | 9.9 |
| 22 | ± 1.1 | 66 | ± 2.0 | 28.6 | 81.4 | 12 |
| 23 | ± 1.2 | 69 | ± 2.1 | 29.9 | 85.1 | 13.1 |
| 24 | ± 1.2 | 72 | ± 2.1 | 30 | 84 | 14.5 |
| 25 | ± 1.3 | 75 | ± 2.2 | 32.5 | 92.5 | 15.6 |
| 26 | ± 1.3 | 78 | ± 2.3 | 33.8 | 96.2 | 16.8 |
| 28 | ± 1.4 | 84 | ± 2.5 | 36.4 | 104 | 19.5 |
| 30 | ± 1.5 | 90 | ± 2.7 | 37.5 | 105 | 22.1 |
| 32 | ± 1.6 | 96 | ± 2.9 | 41.6 | 118 | 25.4 |
| 36 | ± 1.8 | 108 | ± 3.2 | 46.8 | 133 | 32.1 |
| 38 | ± 1.9 | 114 | ± 3.4 | 49.4 | 140.6 | 35.8 |
| 40 | ± 2 | 120 | ± 4.0 | 52 | 148 | 39.7 |
| 45 | ± 2.3 | 135 | ± 4.0 | 58.5 | 167 | 52.2 |
| 48 | ± 2.4 | 144 | ± 4.3 | 62.4 | 177.6 | 57.2 |
| 50 | ± 2.6 | 150 | ± 4.5 | 65 | 185 | 62 |
Tablo 2: Klas 100 (G100) pwopriyete mekanik chèn
| dyamèt | limit chaj k ap travay | fòs prèv fabrikasyon | min. fòs kraze |
| 6 | 1.4 | 36 | 57 |
| 7 | 1.9 | 48 | 77 |
| 8 | 2.5 | 63 | 101 |
| 10 | 4 | 98 | 157 |
| 13 | 6.7 | 166 | 265 |
| 16 | 10.3 | 251 | 402 |
| 18 | 12.5 | 318 | 509 |
| 19 | 14 | 354 | 567 |
| 20 | 16 | 393 | 628 |
| 22 | 19.4 | 475 | 760 |
| 23 | 20 | 519 | 831 |
| 24 | 23 | 566 | 905 |
| 25 | 25 | 614 | 982 |
| 26 | 26.5 | 664 | 1060 |
| 28 | 30.5 | 769 | 1230 |
| 30 | 35.5 | 884 | 1415 |
| 32 | 40.5 | 1006 | 1610 |
| 36 | 50 | 1272 | 2035 |
| 38 | 56.5 | 1420 | 2270 |
| 40 | 62.5 | 1571 | 2515 |
| 45 | 81 | 1988 | 3180 |
| 48 | 92 | 2263 | 3620 |
| 50 | 98 | 2453 | 3925 |
| nòt: total elongasyon ultim nan fòs kraze se min. 25%; | |||
| chanjman nan Limit chaj k ap travay an relasyon ak tanperati a | |
| Tanperati (°C) | WLL % |
| -40 a 200 | 100% |
| 200 a 300 | 90% |
| 300 a 400 | 75% |
| plis pase 400 | inakseptab |
Enspeksyon sit
Sèvis nou an
